|
Top of the board:
4 diodes & 2 LEDs to indicate motor on and direction, one resistor
2 metal push on connectors for +24v and ground.
2 metal push on connectors for the "silver bomber motor".
2 PNP MOSFETs
2 NPN MOSFETs
|
|
Bottom of the board:
Nice strait cuts drawn in AUTOCAD and milled & drilled on my Sherline
The MOSFETS are layed flat so that they can be screwed down to a flat heatsink( with insulating pads ,of course.)
The MOSFETS are also easier to change this way
|
|
Bottom of the board:
different angle & flash setting
This is just a "proof of concept" - Prototype. I plan to add addional logic to control
the MOSFETS and prevent the wrong two from being turned on at the same time
|
<